C-Series Backhoe Loaders B80C


C-Series Backhoe Loaders B80C




​​The all new class leading C series cab gives you more: more space, more storage, more glass area, more comfort and a host of new features. The cab is now wider, making it easier to turn the seat when switching from front loader work to backhoe use. New rear side windows provide better visibility while the redesigned right side console improves ergonomy and control layout, regardless of what direction you are working in. Storage capacity has been significantly increased with the addition of two lockable compartments, two bottle holders, four open trays and a ventilated cooling box. Operator convenience is improved thanks to the two USB ports for charging mobile devices, Bluetooth radio and mobile phone holder. In-cab noise levels have been reduced by further enhancing operator comfort.

A high grip floor covering comes as standard to help prevent the operator slipping when entering with muddy footwear. Large retractable sunshades, cup holders, glove box and a deluxe pneumatic heated seat are included and to top it off, the engine exhaust pipe is located to the right side of the cab to provide a clear view of the loader arm.

​ • Improved clearance and legroom when transitioning to operate the backhoe
• A choice of entry level mechanical and deluxe heated pneumatic suspension seats are available
• Low in-cab noise level
• Good visibility is a key design priority: C Series backhoe loaders benefit from extremely slim cab pillars, front and rear ​​​​​​​​​



​​​​​​​Front loader - Choose SLA Straight Arm or TC Tool Carrier loader designs

SLA Straight Loader Arm features:

• Hydraulic auto self-levelling
• Higher lift capacity
• Greater lift height

TC Tool Carrier loader arm features:
• Mechanical parallel lift and lower
• Greater reach than straight arm
​ • Ideal for pallet and loading duties​​​​​​​​



​​​​​New Holland backhoe loaders are offered with a choice of hydraulic pump designs to match the precise requirements of end users.​
In addition, an auxiliary hydraulic circuit is available for powering attachments such as hydraulic breakers and soil augers.
Two hydraulic pump designs are offered:

Twin gear pump
• Simple
• Constant flow
• Fast warm up
• Straightforward service and maintenance
• For general use. Suits applications with limited roading
​• A variable displacement hydraulic pump only delivers flow on demand, saving fuel when roading and in applications such as dozing and grading



​​​​​FPT Engine
The FPT engine delivers a big performance in a small package with the lowest maintenance cost in the market:
• The air intake system with centrifugal pre-filter reduces the cleaning intervals
• High turbulence piston and air intake manifold​​
• High pressure multi-injection common rail for a perfect air-fuel mix and greater burning efficiency
• Mechanical Injection Pump for B80C​​ ensures high power combined with an easy to mantain
​​ • Viscous fan: no power is wasted with its low cooling demands​​​​​​​​

Make and ModelS8000 BS-3 Certified-8045.45.748
Injection systemDirect Injection, Turbo charged Intercooler
Emissions levelTier 3
# of cylinders4
Bore / Stroke104 mm x 115 mm
Displacement / Compression ratio3.9 L
Engine rated Power (ISO 14396)97 hp (72 kW) @ 2200 rpm
Maximum torque (ISO 14396)420 Nm @ 1300 rpm
Engine speeds2200 rpm (rated speed @ full load)
TypeManual shift, 4 speed, Fully sync.
ModelCarraro 2WD TLB1/ Carraro 4WD TLB1
Forward travel speeds (kph)6.2 - 10 - 20.7 - 39.2 km
Reverse travel speeds (kph)7.4 - 12 - 24.8 - N/R* km
TypeLoad sensing, closed center hydraulic system
Flow (@ 2200 rpm)145 l/min
Pressure205 bar
Boom height (transport position) mm3800 mm
Wheel base mm2175 mm
Cab height mm2830 mm
Overall width with standard loader bucket mm2277 mm
Minimum ground clearence mm380 mm
Operating weight range Kg7730 - 8290 Kg



B80C -Brochure
size: 8703KB.


New Holland Attachments


Quick Map


Find a dealer

Find the nearest New Holland dealer in your area.

Stay Connected